Felix 419 DC
AWS/ASME A 5.6 E CuAl - A2
DIN 1733 : EL-CuAl9
Sizes :
2.5 x 300 mm
3.15 x 350 mm
4 x 350 mm
Customized Sizes Can Be Made.
Availability : In Stock
Premium Aluminium Bronze Electrode For Joining And Surfacing Copper Alloys.
- High Resistance To Wear , Cavitation And Corrosion In Mediums Like Sulfuric Acid , Sea Water Etc .
- Can Be Used For Welding Copper Alloys To Various Grades Of Weldable Cast Irons To High And Low Carbon Steels .
- Stable Arc With Easy Slag Removal .
- Excellent Mechanical Properties With Adequate Electrical Conductivity .
- For Welding Of Ship Propellers , Pump Housings , Piston Heads , Bearings , Copper-Zinc Alloys , Copper-Nickel Alloys , Silicon And Manganese Bronze And Bronze Of Similar Composition .
- Can Be Used For Surfacing On Cast Irons , Steels And Copper Alloys .
Tensile Strength 65000 PSI
Hardness Brinell 145
Elongation 22 %
- Clean Weld Area . The Material To Be Welded Should Be Free Of Oil , Grease And Dust .
- Arc Length Should Be Kept As Short As Possible . Avoid Excessive Wide Weaving .
- Stringer Beads Are Recommended . Preheating At 450-650° C Is Required For Heavier Sections .
- DC Reverse Polarity (Electrode +Ve) .
