Felix 287 DC (410-15)
AWS/ASME A5.4 E 410-15
Sizes :
2.5 x 300 mm
3.15 x 350 mm
4 x 350 mm
Customized Sizes Can Be Made.
Availability : In Stock
Premium 13 % Cr Basic Electrode For Welding AISI 403, 405, 410, 420 Steels.
- Good Corrosion Resistance In Aequous Conditions And Against Sulphuric Gases.
- Recommended Preheat And Postheat Weld Traetment Except Thin Sections.
- Martensitic Stainless Steel Deposits Which Are Non-Scaling Up To 850° C.
- Superior Flux Chemistry Gives Good Arc Transfer And Easy Slag Removal.
- Smooth Weld Beads With Good Operator Appeal.
- Typical Applications Are Valve Seats, Hydroelectric Turbine Fans, Propeller Shafts, Pump Rotors, Gas Turbine Parts In Power Generation, Offshore, Chemical, Oil And Petrochemical Industries.
- Used For Overlaying Mild And Low Alloy Steels For Resistance To Corosion, Erosion And Abrasion.
Tensile Strength 75000 PSI
Yield Strength 58000 PSI
Elongation 21 %
- Clean Weld Area. Arc Length Should Be Kept As Short As Possible. Avoid Excessive Wide Weaving.
- Stringer Beads Are Recommended. If Necessary Redry Electrodes At 300° C For One Hour Before Use.
- Preheat At 100 - 150° C For Thick Components. Post Weld Heat Treatment At 580 - 620° C.
- DC Reverse Polarity (Electrode +Ve) Or AC.